PUMP FAILURES
STOP PLANTS.
COMPLETE PUMP MAINTENANCE
Four failure areas.
One Stanvac solution set.
-
1
WET END
Less abrasion and erosion. Longer wet-end life.
-
2
BEARINGS
Less grease washout. Fewer early bearing failures.
-
3
SEALS & PACKINGS
Longer rubber life. Less gland leakage and sleeve wear.
-
4
OUTER CASING
Treat trapped rust. Reduce repeat repainting.
FOUR AREAS TO PROTECT
THE COST OF AN UNPLANNED STOP
PRODUCTION IS AT RISK.
REFINERIES &
PETROCHEMICALS
Process, transfer and cooling-water pumps
Production stoppage.
Hazardous leakage.
THERMAL POWER
Boiler-feed, condensate and FGD slurry pumps
Generation loss.
Emergency shutdown.
MINING & STEEL
Slurry, cyclone-feed, dewatering and descaling pumps
Ore flow or cooling interrupted.
CHEMICALS &
FERTILISERS
Acid-transfer, recirculation and slurry pumps
Batch loss.
Chemical leakage.
PULP & PAPER
Stock, fan and black-liquor pumps
Paper machine stops.
WATER & ETP
Raw-water, sewage and sludge pumps
Supply interrupted.
Overflow or flooding.
1 / INTERNAL WET END
REPAIR WEAR.
PROTECT THE FLOW PATH.
NMB TECHNOLOGY
Nano-Molecular Bonding
1170 bonds to ST 2 hand-cleaned steel. Remove grease, salts and loose material.
1170 STANGARD
Ceramic-metal rebuilding putty
Rebuilds worn areas to extend casing life.
1190 STANGARD
Smooth ceramic flow coating
Protects high-flow surfaces after rebuilding.
731 ER XTREAM
Fine-particle abrasion-resistant putty
Resists abrasive and erosive wear.
1180 NMB
Ceramic protective coating
An erosion/corrosion barrier for specified duties.
High-flow repair: 1170 + 1190.
731 or 1180: select for the specific duty.
2 / BEARINGS
KEEP GREASE IN PLACE.
100% SYNTHETIC.
VERY HIGH RESISTANCE
TO WATER WASHOUT.
Z939 BEARING
SOLVENT NF
Precision bearing degreaser
Removes old grease before relubrication.
SL WPG
AQUATHERM
Fully synthetic, non-melting water-pump grease
Helps lubrication withstand water ingress.
Grease-lubricated bearings only. Check speed, temperature and grease compatibility. Stop water entry.
3 / SEALS & PACKINGS
REDUCE LEAKAGE & WEAR.
SILTEC HD
Rubber seal and O-ring preservative
Helps compatible rubber seals last longer.
GLANDEX EP
High-load gland-packing dressing
Reduces packing friction, leakage and sleeve wear.
SILTEC: compatible rubber only, never seal faces.
GLANDEX: packing only, not mechanical seals.
4 / EXTERNAL CASING
TREAT THE RUST.
THEN PROTECT THE CASING.
Z704 RUSTEX-NMB +
2050 POLYHYB SHP
Z704 RUSTEX-NMB
TriArmor rust-converting primer
Treats residual rust before coating.
2050 POLYHYB SHP
Fast-drying hybrid co-polymer finish
Protects the outer casing; repels dust and water.
2050: external C1-C3 exposure. Continuously wet, coastal, chemical or hot service needs a different specification.
PROTECT ALL FOUR AREAS
PLAN YOUR NEXT
PUMP REPAIR.
Send pump photos, liquid handled, temperature, speed and the present problem. Request a repair recommendation and quotation.