MECHANICAL SOLUTIONS

CERAMIC WEAR PROTECTION

Anti-abrasion and anti-erosion coatings for steel mills

FOR SELECTED DUTIES BELOW 120°C

01  CERAMIC PRIMER

1180 NMB Ceramic Coat

FLEXIBLE PRIMER · ST3 GRINDING

Nano Molecular Bonding (NMB) anchors 1180 to
ST3-ground steel without abrasive blasting for
specified applications. The flexible ceramic primer
resists brittle cracking and peeling, helping keep
the full system bonded.

02  CERAMIC WEAR LAYER

731 ER XTREAM

NANO ZIRCONIUM WEAR RESISTANCE

This fibre-reinforced putty uniquely uses hard
nano zirconium for substantially better abrasion
and erosion resistance than conventional
ceramic-bead or standard zirconium coatings.
Higher coverage per kg reduces coating
consumption.

STEEL MILLS

Cooling water, abrasive slurry and wet material handling

Integrated steel plant with blast furnace, stoves and process buildings

Illustrative problem and after views

Wet grit scours grooves into the slurry pump volute and cutwater.Illustrative after view: the worn area rebuilt and protected with 1180 + 731 ER XTREAMAFTER

WET GRIT SCOURS GROOVES INTO THE SLURRY
PUMP VOLUTE AND CUTWATER.

01

Abrasive Slurry Pump Casings

APPLICATION

Steelworks slurry pump casings, volutes and
cutwaters in approved wet service.

TECHNOLOGY

1180 primes the prepared casting. 731 ER XTREAM
rebuilds local wear to the specified flow profile.

CUSTOMER GAIN

Slow wet abrasion and help extend the interval
between wet-end repairs.

Abrasive waste cuts channels into the flume floor and sidewall.Illustrative after view: the worn area rebuilt and protected with 1180 + 731 ER XTREAMAFTER

ABRASIVE WASTE CUTS CHANNELS INTO THE FLUME
FLOOR AND SIDEWALL.

02

Wastewater Flume Wear Zones

APPLICATION

Scoured flow surfaces in approved steel mill
wastewater flumes.

TECHNOLOGY

1180 primes the compatible prepared lining. 731 ER
XTREAM fills local grooves to restore the channel
profile.

CUSTOMER GAIN

Help keep solids moving through the flume and
reduce repeat lining repairs.

Scale grit scours out grout and exposes tile edges in the sluice.Illustrative after view: the worn area rebuilt and protected with 1180 + 731 ER XTREAMAFTER

SCALE GRIT SCOURS OUT GROUT AND EXPOSES TILE
EDGES IN THE SLUICE.

03

Scale-Water Sluice Tile Joints

APPLICATION

Wear at tiles and lining transitions in downstream
rolling-mill sluices carrying cooled scale water.

TECHNOLOGY

1180 primes the approved prepared surface. 731 ER
XTREAM fills recessed joints and restores a flush
transition to sound tiles.

CUSTOMER GAIN

Reduce places where grit can lodge and keep sound
lining in service longer.

Pitting and erosion eat into the inlet lip of the cooling-water pump.Illustrative after view: the worn area rebuilt and protected with 1180 + 731 ER XTREAMAFTER

PITTING AND EROSION EAT INTO THE INLET LIP OF
THE COOLING-WATER PUMP.

04

Caster Cooling-Water Pump Inlets

APPLICATION

Suction covers and eroded inlet surfaces on casting
cooling-water pumps.

TECHNOLOGY

1180 primes prepared metal. 731 ER XTREAM
rebuilds worn areas to the specified inlet contour.

CUSTOMER GAIN

Help preserve inlet geometry and extend service
between pump overhauls.

Recycled process water pits the wall inside the strainer housing.Illustrative after view: the worn area rebuilt and protected with 1180 + 731 ER XTREAMAFTER

RECYCLED PROCESS WATER PITS THE WALL INSIDE
THE STRAINER HOUSING.

05

Recycled-Water Strainer
Housings

APPLICATION

Erosion and corrosion on the internal flow surfaces of
steel mill recycled-water strainer housings.

TECHNOLOGY

1180 primes the prepared metal. 731 ER XTREAM
rebuilds local pitting while preserving the basket
seating and seal profiles.

CUSTOMER GAIN

Protect internal flow surfaces and help extend
housing service life.

Confirm the peak metal temperature, substrate condition and particle or slurry duty before specification. Use the approved
wet-service temperature and chemistry for immersed parts.

STANVAC CHEMICALS INDIA LTD.

Home Download