Stanvac Firestop · DIY Home Kit · World First · 2026
Fire Protection
For Your Home
Do It Yourself
WorldFirst2026
Electrical fire in homes is a real danger.
80%
of India's urban fires are electrical
26 min
India loses one life to electrical fire every 26 minutes
01What happens today
1
How it beginsFire bursting inside an ordinary panel box.
2
How it endsAranya Society, Noida — 29 June 2026. Fire and smoke take the floor in minutes. (Photo: PTI)
Spark / ShortOne loose joint. One overload. One rat bite.
Ignites CablesPVC insulation is fuel — it burns.
Fire + SmokeSmoke is the killer in most home fires.
Spreads Through WiringEvery wire becomes a road for the fire.
It can be easily prevented.
As easy as painting a wall — one hour of your time, ten years on guard.
02When we apply 7034
The translucent 7034 film — brushed on like simple paint.
First time in the world · 2026
7034 Home Kit
Self-application fire protection for all exposed wires and all exposed surfaces within your panel box. Brush it on like paint.
Nothing like this has been seen in the world before.
500 mL Coating
Brush
Gloves
Spark / ShortFaults still happen — that never changes.
Don't Ignite7034-coated cables & surfaces refuse the flame — the film denies it fuel.
Reacts — Swells — StopsHeat triggers the coat to expand into a fire-blocking shield.
No FireFrom within the panel box.
No BurningOf exposed wires — your wiring stays a wire, never a wick.
3
The film at work7034 coated on panel wiring — translucent, flexible, labels readable.
4
What it protectsEveryone under your roof — guarded for a minimum of 10 years.
03Proven in the fire lab — not just promised
Tested & Certified
120
Minutes — CBRI
Central Building Research Institute, Roorkee
Cat A
IEC 60332-3-22
International bunched-cable flame-propagation test — toughest category
The same certified chemistry trusted by India's refineries, steel plants and power stations — now in your hand.
04As simple as painting
Simple To Use
Six steps. One hour — start to finish.
1
Switch Off
Mains off at the panel.
2
Wipe Dust
Off the cables and flammable surfaces.
3
Apply 1st Coat
Shake well. Brush onto the wires like simple paint.
Wait20 min
4
2nd Coat
Straight over the first.
Wait20 min
5
3rd Coat
One more pass — the film builds.
Wait20 min
6
Apply 4th · Switch On
No need to wait — it dries by itself.
Total1 hour
A clear, translucent, flexible film is formed.
Labels stay readable. Wires stay flexible. Protection is on.
05Any wiring · Any combustible surface
Apply It On
Panel / Junction Boxes
Cables and all exposed surfaces inside.
Exposed AC / Cooler Cables
The trailing wires that heat, age and crack in the open.
UPS Wires
Loaded round the clock — coat them once, relax.
Your reliable sentry against fires on electrical wires — who never sleeps, for a minimum of 10 years.
One kit · Four coats · Never off duty